Control Outputs: Solid state switches (low voltage AC or DC) for operating external alarms and control devices.

Indicators: Ready light indicates unit is operational; Alarm light and audible alarm are activated when target amount of metal is detected; LED bar graph indicates amplitude of alarm signal.

Tamperproof: All detection electronics can be secured behind a key-lock door in the Overhead Cap Assembly. Dual-level access codes required to set or change all sensitivity settings and detection programs; one level for use by superiors in selecting programs and sensitivity and the other for initial set-up and overall control; non-resettable sequence code logs all changes made whenever sensitivity codes are accessed. Audible alarm reports any unauthorized attempt to access. All connectors and plugs keyed to ensure proper connections.

Regulatory Standards: Meets or exceeds detection requirements of the;
• National Institute of Law Enforcement and Criminal Justice Standards #0601, levels 1-5.
• Federal Aviation Administration airport application specifications. Programs have been designed specifically to meet the three gun test of the FAA and the requirements of the Undetectable Firearm Act of 1991.
• IEC standards for Electronic Measuring Apparatus.
• FCC Class B standards for noise emission from commercial electrical equipment.

Public Safety: The peak magnetic field strength of less than one Gauss will not affect magnetic recording media, including magnetic tape, diskette and cards. Unit has been tested in accordance to and meets the electromagnetic safety requirements of:
• Institute of Electrical and Electronics Engineers: "A standard of Safety Levels with Respect to Human Exposure in Radio Frequency electromagnetic Fields, 3 KHz to 300 GHz" IEEE C95.1 - 1991 section 4.12.
• Occupational and Safety Health Administration; Radiation Protection Guide, CFR 1910.97 section (2).
• National Institute of Law Enforcement and Criminal Justice; Standards for Walk-Throughh Metal Detectors for use in Weapons Detection. NILECJ-STd-0601,00 section 4.11.
• Canada Health and Welfare Performance Standards (Walk Through), rPB-SC-18 section 3.2.2 which addresses the issue of electromagnetic effects on cardiac pacemakers.

Weatherproofing/Foreign Object Protection Standards: Meets IP Code, IEC Standard, " Degrees of Protection Provided by Enclosures*, CEl 529.

Interference Rejection: 100% sensor coil Faraday shielding; special Garnnett built-in circuitry for noise suppression and ignoring x-ray monitor horizontal sync.

Masking: Microprocessor programming designed to eliminate the problem of detection signals from two or more targets canceling each other.

Synchronization: Multiple frequencies permit several Megascanners to operate simultaneously and in close proximity.

Electrical: Fully automatic input; 100 to 240 VAC. 50-60 Hz, 5 watts. Power supply meets UL, CSA, TUV, and VDE standards.

Operating Temperatures: 4F (-20C) to 158F (70C).

Humidity: To 95% noncondensing.

Throughput Rate: Not limited by electronics.

Weight: 189 pounds.

Model Number: 1167200