Control Outputs: Solid state switches (low voltage AC or Dc) for operating external alarms and control devices.

Indicators: Ready light indicates unit is operational; Alarm light and audible alarm are activated when target amount of metal is detected; LED bar graph indicates amplitude of alarm signal.

Traffic Counter: Build-in and resettable with current reading easily available on LCD panel.

Tamperproof: Dual-level access codes required to set or change all sensitivity settings and detection programs; one level for use by supervisors in selecting programs and sensitivity and the other for initial set-up and overall control; non-resettable sequence code logs all changes made whenever sensitivity codes are accessed. Audible alarm reports any unauthorized attempt at access.

Construction: Attractive scratch-and mar resistant laminate with resilient end caps; control panel and cross pieces of heavy duty aluminum.

Regulatory Information: Meets or exceeds detection requirements of the National Institute of Law Enforcement and Criminal Justice Standards #0601.00, levels 1-5, and Federal Aviation Administration airport application specifications. Programs have been designed specifically to meet the three-gun test of the FAA and requirements of the Undetectable Firearm Act of 1991.

Also complies with IEC standards for Safety requirements for Electronic Measuring Apparatus and meets the Federal Communications Commission Class B standards for noise emission from commercial electrical equipment.

Conforms to the new European Electromagnetic Compatibility Directive, 89/336/EEC c
" EN 55011, Group 2, Class B " EN 50082-1

Public Safety: The peak magnetic field strength of less than one Gauss will not affect magnetic recording media, including magnetic tape, diskette and cards. Unit has been tested in accordance to and meets the electromagnetic safety requirements of:

Institute of electrical and Electronics Engineers: "A Standard of Safety Levels with Respect to Human Exposure in Radio Frequency Electromagnetic fields, 3 KHz to 300 GHz IEEE C95.1 - 1991 section 4.12.

Occupational and Safety Health Administration: Radiation Protection guide, CFR 1910.87 section (2)i.

National Institute of Law Enforcement and Criminal Justice: Standards for Walk-Through Metal Detectors for use in Weapons Detection, NlLECJ-STD-0601.00 section 4.11.

Canada Health and Welfare Performance Standards (Walk through), RPB-SC-18 section 3.2.2 which addresses the issue of electromagnetic effects to cardiac pacemakers..

Weatherproofing/Foreign Object Protection Standards: Meets 1P 31, IEC Standard, "Degrees of Protection Provided by Enclosures", Cel529.

Infrared Sensor: Improves analysis of detection signal: increases throughput; helps eliminate "false alarms," also provides accurate traffic counter.

Interference Rejection: 100% sensor coil Faraday shielding; special Garrett built-in circuitry for noise suppression and ignoring x-ray monitor horizontal sync.

Masking: Microprocessor programming designed to eliminate the problem of detection signals from two or more targets canceling each other.

Synchronization: Multiple frequencies permit several Magnascanners to operate simultaneously in close proximity.

Electrical: Fully automatic 100 to 240 VAC, 50 or 60 Hartz, 5 watts; no rewiring, switching or adjustments required. Power supply meets UL, CSA, TUV, and VDE Standards.

Operating Temperatures: -47 (-20C) to + 158F (70C)

Humidity: To 95% noncondensing.

Throughput Rate: Not limited by electronics; 50-60 detections per minute is reasonable.

Optional Features: 2225700 Battery back-up - allows up to 20 hrs.
2225600 Remote Control Console - allows remote operation up to 50 feet.
116800 Magna Dolly wheel assembly for easy portability.
1603900 Stabilizer Base.

Weight: Approximately 99 pounds (45kg).
Warranty: 24 months, parts and labor.
Model: 1167410