| One
attendant at the master station can monitor and respond to
calls from up to ten remote stations.
When
multiple remote stations are needed to communicate with
one master station the TTU-3MS is your best choice. One
attendant at the master station can monitor and respond
to calls from up to ten remote stations. The TTU-3MS allows
clear communication to a remote station up to a thousand
feet away. The prism shaped master station of the TTU-3MS
is ideal for mounting on a counter top.
The
TTU-3MS incorporates the same high-quality electronics as
the basic Patent Pending Norcon Talk Thru system.
The TTU-3MS provides clear communication even in environment
with high ambient noise by shaping the sound for maximum
intelligibility. Its compression circuit deceases loud,
annoying sounds.
The
operator can initiate communication with any remote station
by pressing and holding the appropriate push button on the
master unit. If two or more push buttons are pressed at
the same time the lowest numbered unit will have priority,
communication will be allowed to that unit only.
A person
at one of the remote stations depresses the call origination
switch. At the master unit control panel a light will illuminate
(and latch) and a buzzer will sound (while the remote switch
is pressed) to alert the operator. The operator would respond
by pressing and holding the push button switch under the
illuminated light (the light extinguished when the switch
is pressed). This enables hands free two-way communication
between the master unit and the selected remote station.
The
prism shaped master station of the TTU-3MS is ideal for
mounting on a counter top.
Remote
stations have a built in microphone speaker and a push to
call switch. Remote stations are housed in a flush mount
or surface mount weatherproof enclosure.
Amplified handsets with armored cable and a hook switch are
available.
Ninth
Remote Station
When no push button is pressed the master unit will communicate
with the eleventh remote station. When any push button is
pressed the 11th remote station is disconnected and the
corresponding remote station will be connected. There is
no call origination switch on remote station 11.
|